Nashville Clothing Manufacturers (2027): 3 Shops and Their Limits

published on 18 November 2026
Beige herringbone wool fabric draped in soft folds on a white surface

Nashville has three shops we could confirm on their own websites that sew clothing for outside designers, and each one has a clear limit. Two run small batches: a production shop in Donelson that caps a single order at 1,000 units and does not source fabric, and a studio in an old cotton mill near downtown that has no minimums but now takes production work from only a few designers. The third is a development studio that makes patterns and sews prototype samples, not production runs.

That is a short list for a city of Nashville's size, and the federal numbers explain why. Davidson County averaged 826 private-sector apparel manufacturing jobs across 18 establishments in 2025, according to the Bureau of Labor Statistics, but those jobs paid an average of $86,465 a year, more than twice the mean pay of a sewing machine operator in the Nashville metro area. This guide sets out what each shop says it makes, what it says it cannot do, what the federal figures say, and where to take an order that Nashville cannot sew.

About us: OneAim places and manages production with documented clothing factories in the United States. The businesses below are independent and are listed from their own public websites. None of them is a member of our group. What OneAim does instead: we place your production with a documented factory in our group built for your product.

The short list

  • One shop publishes real production terms. Red Thread Company in Donelson lists minimums as low as 1 to 30 units per style and a capacity of 600 to 1,000 units per order, but you must supply all fabric.
  • No minimums, limited places. Music City Sewing sews in an old cotton mill a mile from downtown with no order minimums, but its site says it now manufactures for only a few designers, case by case, and makes no accessories.
  • Samples, not production. Masarie Patterns is a Nashville development studio for patterns, grading, tech packs and prototype samples; it does not describe production runs.
  • The county count is mostly not sewing. Davidson County's 826 apparel manufacturing jobs in 2025 averaged $86,465 a year, against a $36,980 mean for sewing machine operators in the metro area (BLS).
  • Tennessee is shrinking more slowly than the US. State apparel manufacturing jobs fell 33% from 2015 to 2025, from 4,195 to 2,794; the US fell 42% (BLS QCEW).
  • Nashville sewing is not expensive. Sewing machine operators in the Nashville metro averaged $17.78 an hour in May 2025, below the US mean of $18.08 and the Los Angeles metro's $19.40 (BLS OEWS).

Free estimate: calculate your landed cost with our garment cost calculator in about a minute. No email needed.

Nashville clothing manufacturers at a glance

If you want your clothing sewn in Nashville, your realistic options are a small-batch production run, a handful of pieces from a studio that takes few production clients, or a set of patterns and samples you then take to a bigger factory. Here is what each business says about itself, and the one thing each cannot do that matters most when you plan a launch.

BusinessWhereWhat it says it makesMinimum on its siteMain limit on its site
Red Thread CompanyDonelson, NashvillePatterns, grading, samples, tech packs and small-batch production in knits and wovensAs low as 1 to 30 units per styleNo fabric sourcing; 600 to 1,000 units per order
Music City SewingOld cotton mill, one mile from downtownTech packs, patterns, samples, grading and small-batch productionNo order minimumsNow manufactures for few designers, case by case; no accessories
Masarie PatternsNashvillePatterns, grading, tech packs, prototype samples and fittingsNone publishedA development studio; it does not describe production runs

All three were checked on their own websites in November 2026. The last two columns are our reading of what each business publishes; confirm with the business before you plan around it.

How we checked Nashville clothing businesses

We started from the names that appear in Nashville manufacturer searches, production directories, local press and an earlier version of this guide, then opened each business's own website. We kept a business only if it passed three tests.

  • Its own site works. The site loads, belongs to the business, and describes what it does today.
  • It says the work happens in Nashville. The site names Nashville, or a Nashville neighbourhood, as the place where it sews, not only where it designs, sells or decorates.
  • It says it sews for outside designers. Production, small batches or samples for other brands, not only its own label or alterations.

Businesses whose site did not load, has expired, or could not be found were left out, even when directories still list them. Where a fact is a company's own statement, we say so. We did not visit any of these businesses, and none of them paid to appear.

1. Red Thread Company, Donelson (small-batch production)

Red Thread Company is the closest thing to a small production floor that we could confirm in Nashville. Its home page describes it as a small batch apparel manufacturing shop in Nashville for independent designers and business owners, and lists pattern drafting, pattern grading, sample and product development, technical packet design, and small batch apparel and soft goods manufacturing. It says it handles knit and woven materials.

The same page says the company was founded in 2018 in Nashville by Anastasia Morozova, who continued running a small batch development and manufacturing shop she had opened a year earlier with two partners. Its jobs page places the shop in Donelson and says it produces a large range of products for women's, men's and children's wear, plus soft goods and accessories. The job description asks for experience on an industrial 4-thread serger and an industrial single needle machine, and lists cutting, final quality control, pressing, folding and boxing orders among the duties.

What it publishes about minimums and capacity

Red Thread is unusual in publishing numbers. Its services page says that, based on the number of colourways per design, its minimums can be as low as 1 to 30 units per style, and that its capacity per single order is currently set at 600 to 1,000 units. It also says it requires an initial sample of your design to be sewn in house before production, because that sample is how it works out your production cost per unit.

The development side is spelled out step by step. The services page describes hand-drafted patterns on alpha-numeric paper, with digital copies on request, hand grading in house, tech packs or construction call-out sheets, and sample rounds returned to you for a fit test. It offers a free initial consultation on a specific design and charges $100 an hour for further consultation.

What it cannot do

Fabric sourcing. The services page says, in capitals, that the company does not offer fabric sourcing at this time, that it offers partial notion sourcing, and that all fabrics, and preferably notions, must be provided by the designer. If you do not have a fabric supplier yet, solve that first.

Volume. A single order tops out at 1,000 units by the company's own figure. That is a real small-batch run, enough for a first drop across a few styles, but not a reorder plan for a growing wholesale business.

Skipping the sample. You cannot send a tech pack and get a production price straight back. Budget for an in-house sample and the time it takes.

2. Music City Sewing, near downtown (no minimums, few production clients)

Music City Sewing runs a small batch manufacturing division from a workspace its site describes as an old cotton mill just one mile from downtown Nashville. The page lists its industrial machines: a Juki 8700D straight stitch, a Yamata straight stitch, a Juki walking foot, a Consew CN2053 zigzag, a Union Special blind hemmer, a Wilcox & Gibbs Pegasus 5-thread serger, and a Kansai 3-needle, 5-thread coverstitch. That is a compact knit and woven setup: enough for tees, shorts and simple woven tops, without specialist machines for heavy outerwear or tailoring.

Its minimum is the most generous in the city. The page says the studio is set up with transparent lead times and no minimum order quantities, whether you want one garment or hundreds, and that the more you order, the more economical it gets. It also says everything that comes through the door is made in Nashville, with no outsourcing to another country, and that its sewing team is paid a livable wage.

The list of things it has made is broad: t-shirts, athletic shorts, joggers, hoodies, crop tops, swimwear, button-down shirts, wrap dresses, jeans, baby clothing, dog clothing and housewares, among others. The page describes two ways in. If you already have a tech pack, a sample garment and materials, it quotes the cost of a sample. If you are starting from a sketch, it builds tech packs, sources wholesale and consults at $150 an hour, billed by the step upfront.

What it cannot do

Take every production client. The page says demand for small batch manufacturing has been overwhelming and that the studio now only manufactures for a few designers on a case-by-case basis. It says it can still help with tech packs, patterns, sampling and grading if your batch is not a fit. Ask early whether production is open before you plan around it.

Accessories. The page says plainly that it does not make accessories of any kind, even though messenger bags and belts appear in its list of past work. Treat the current statement as the rule.

Quote a unit price before it has sewn your item. The page says it cannot give per-unit costs for an item it has never made, and that it will have one once the sample is finished. A no-minimum studio is a strong choice for a first sample or a very small drop. It is not set up to take a large order at short notice.

Close-up of black and white herringbone wool tweed showing the weave

3. Masarie Patterns, Nashville (patterns and samples)

Masarie Patterns is a development studio, and it is the most specialised of the three. Its home page describes a pattern maker and custom fit specialist based in Nashville, offering concept development, technical design, pattern drafting, grading and sample making. Its services list covers pattern development, pattern grading, technical sketches and tech packs, sample sewing of proto samples so you can test fit, style and function before full production, pattern adjustments, and consulting and fitting.

Its about page says founder Annie Masarie worked in New York's garment district, launched a freelance practice in 2014, relocated to Nashville in 2018 and expanded into a full studio offering sourcing, tech packs, sampling, grading and production guidance. The studio says it is known for inclusive sizing and helping brands extend their size ranges, and the about page says a member of its team works in both Optitex and CLO3D. The studio's address on its own site is on Clofton Drive in Nashville.

What it cannot do

Production runs. Nothing on the studio's site offers bulk sewing. Its sample sewing service is described as proto samples before full production, and its other services prepare a design for a factory. Use it to get a pattern that fits across your size range and a sample you are happy with, then take both to a shop or factory that can run your quantity.

A strong pattern is worth paying for in a small run. In a small order, a fit problem in the pattern turns up in every piece, and fixing it after cutting costs far more than one more sample round.

Checked and left out

Prange Apparel is the Nashville name most often linked with cut-and-sew production, and the CFDA's production directory still carries its listing. That listing describes a full-service development and manufacturing company on Lebanon Pike that specialises in women's boutique apparel, with minimums of 25 garments per style and colour and everything cut and sewn in house at its Nashville facility. It points readers to prangeapparel.com for more. When we checked in November 2026, that web address did not load at all, so we could not confirm on the company's own site that it still operates or what it offers today. If you know the company, call before you plan around the directory listing.

We also left out a pattern service based in New York that turns up in Nashville searches, a contract sewing business about an hour from the city whose own web address now shows a holding page, and several names from earlier lists that we could not confirm on a working company site or that are own-brand labels rather than shops that sew for other designers. Directory listings are often years out of date, so check every name on its own site before you send a tech pack.

How much clothing is sewn in Nashville?

Less than the headline number suggests. The Bureau of Labor Statistics counts private-sector apparel manufacturing jobs (NAICS 315) by county in its Quarterly Census of Employment and Wages. Davidson County averaged 826 such jobs across 18 establishments in 2025. Employment for 2015 and 2016 was not published for the county; from 2017 to 2025 it stayed between 740 and 882, while the number of establishments rose from 13 to a peak of 26 in 2023 and fell back to 18.

The pay data tells you what kind of jobs these are. Davidson County's apparel manufacturing jobs paid an average of $86,465 in 2025. Sewing machine operators across all industries in the Nashville metro area had a mean annual wage of $36,980 in May 2025. A workforce paid more than twice the sewing wage on average is unlikely to be mostly sewing operators. Brand head offices, design teams and management can be counted in the same industry code, so the county figure is a picture of the apparel business in Nashville, not of its sewing floors.

The wider metro area is not much bigger. The Nashville metro area had 1,039 apparel manufacturing jobs in 45 establishments in 2023, the latest year with a published metro figure. The cut-and-sew part of the industry (NAICS 3152) had 15 establishments in Davidson County in 2025, but the BLS did not disclose their employment.

Is this a Nashville problem or a national one?

Mostly national. Tennessee averaged 4,195 private apparel manufacturing jobs in 2015 and 2,794 in 2025, a fall of 33%. Over the same years the United States fell from 135,263 to 78,794, a 42% fall, and Los Angeles County, which still holds nearly a quarter of US apparel manufacturing jobs, fell from 41,193 to 18,842, a 54% fall.

Tennessee still has some depth outside Nashville. The state had 101 apparel manufacturing establishments in 2025, and its cut-and-sew segment alone had 2,113 jobs in 74 establishments. Neighbouring states are on a similar scale: North Carolina had 3,850 apparel manufacturing jobs in 188 establishments in 2025, and Georgia had 1,525 jobs in 124 establishments. California had 23,770.

So a Nashville brand that outgrows the local shops is not choosing between Nashville and nothing. It is choosing between a handful of small local shops, a regional factory you can reach by road, and the much larger base in Los Angeles.

Is sewing cheaper in Nashville?

A little, on labour. The BLS Occupational Employment and Wage Statistics program counts sewing machine operators across all industries, not only clothing. In May 2025 the Nashville metro area had 870 of them, with a mean wage of $17.78 an hour. Tennessee had 3,300 at $16.23, the US mean was $18.08, and the Los Angeles metro area had 9,310 at $19.40.

That gap rarely decides a small run. In a batch of a few dozen pieces, the pattern, the sample rounds and the setup time on each style make up much of the cost, and those are priced per project rather than per minute. Lower local wages help most once a style is proven and running at a steady volume, which is exactly where the Nashville shops reach their limits.

When a Nashville shop makes sense

  • A first collection of a few styles. A published minimum as low as 1 to 30 units per style lets you test designs without a bulk commitment.
  • Patterns and fit across a size range. A local pattern studio and in-person fittings shorten the loop when the fit is the hard part of the product.
  • Samples you want to see before you commit. All three shops sew samples, and two require one before they quote production.
  • You already have fabric. If your fabric and notions are bought, the small-batch shops can cut and sew without a sourcing step.
  • Small drops under about 1,000 units per order. That is the upper limit one local shop publishes.

When to produce outside Nashville

  • Orders above 1,000 units. No shop we confirmed in Nashville publishes a capacity above that per order.
  • You need fabric found for you. One local shop says outright that it does not source fabric; a full-package factory buys fabric and trims as part of the job.
  • Accessories alongside the clothing. One shop says it makes no accessories, so bags, belts and hats may need a separate supplier.
  • Specialist construction. Tailoring, heavy outerwear and technical seams need machines that a small knit and woven setup does not list.
  • Reorders on a deadline. A shop that takes few production clients may not have a slot when your bestseller sells out.

Many Nashville brands will end up doing both: develop the pattern and first samples in the city, then send the approved sample and tech pack to a factory that can run the quantity. Our clothing sample rounds playbook walks through how to get from first sample to production approval.

How to brief a Nashville shop

Small shops quote per project, and two of these three say they need a sample before they can price production. The first message decides whether you get a real answer, so lead with the product and the quantity, and ask four questions.

  • Are you taking production work now? One shop says it takes few production clients; ask before you send files.
  • What have you made that is closest to my product? A knit and woven setup and a tailoring room have very different machines.
  • What is my minimum per style and per colour, and your largest order? One shop ties its minimum to the number of colourways and caps an order at 1,000 units.
  • Who supplies the fabric, and who owns the pattern? Settle both in writing before the first sample, because in small runs the pattern is a large part of the cost.

Then send a tech pack with finished measurements, a sample or reference garment, your fabric details, and your real quantity broken down by size and colour. If you do not have a tech pack yet, a development studio is the right first call; if you do, go straight to a production shop.

Can you label it Made in Nashville?

A city name is not a country-of-origin label. The FTC's Made in USA rule, 16 CFR Part 323, says a product may only be labelled Made in the United States when its final assembly or processing happens here, all significant processing happens here, and all or virtually all of its ingredients or components are made and sourced here.

That matters in Nashville because one shop asks you to supply all your own fabric. If your garment is sewn in Nashville from imported fabric, describe it accurately and keep "made in Nashville" marketing separate from the country-of-origin label.

Where to produce when Nashville is too small

For garments at volume, start with our Los Angeles clothing manufacturers guide, and for the wider domestic market our USA apparel manufacturers guide. Closer to home, our Atlanta clothing manufacturers guide covers the shops in Georgia's capital. If you sell into boutiques, our boutique clothing manufacturers guide covers the minimums and lead times that channel needs.

This is where OneAim comes in: once your design and samples are ready, we place your production with a documented factory in our group built for the product.

Nashville clothing production FAQ

Are there clothing manufacturers in Nashville?

A few small ones. On their own websites we confirmed Red Thread Company, a small-batch production shop in Donelson; Music City Sewing, a studio near downtown with no minimums that now takes few production clients; and Masarie Patterns, a development studio for patterns and prototype samples. Davidson County had 826 private apparel manufacturing jobs in 18 establishments in 2025 (BLS QCEW).

What is the minimum order for clothing in Nashville?

Red Thread Company says its minimums can be as low as 1 to 30 units per style, depending on colourways, with a capacity of 600 to 1,000 units per order. Music City Sewing says it has no order minimums.

Can I get 1,000 or more units made in Nashville?

Not from the shops we could confirm. The largest published capacity is 600 to 1,000 units per order, so larger runs need a bigger factory elsewhere in the US.

Do Nashville shops source fabric?

Red Thread Company says it does not offer fabric sourcing and that designers must provide all fabrics. Music City Sewing says it sources wholesale as part of its $150-an-hour development service.

Is Prange Apparel still open?

We could not confirm it. Its CFDA production directory listing describes a Nashville cut-and-sew company, but the website that listing points to did not load when we checked in November 2026.

Where can I get a clothing sample made in Nashville?

Masarie Patterns offers pattern making and proto sample sewing, and both Red Thread Company and Music City Sewing sew samples, which they say they need before quoting production.

Is it cheaper to sew in Nashville than in Los Angeles?

Slightly, on labour. Sewing machine operators averaged $17.78 an hour in the Nashville metro in May 2025, against $19.40 in the Los Angeles metro (BLS OEWS).

Ready to produce in the USA?

OneAim places and manages production with 80 documented clothing manufacturers in the United States. Send the product, the quantity and your target date. Within 24 hours we reply, and we place the order with the US factory in our group that already makes it. Production, invoicing and shipping run directly between you and the factory. Flat fee, no mark-up.

Start my brief US factory directory ($49)

Missing a tech pack? We build a factory-ready spec for one style at $79. See the details.

References and data

  1. Red Thread Company, home page, services and jobs, checked November 2026. Nashville and Donelson location, founding, services, minimums, capacity, no fabric sourcing. Company-stated.
  2. Music City Sewing, small batch manufacturing, checked November 2026. Workspace, machines, no minimums, case-by-case production, products, no accessories, $150 hourly rate. Company-stated.
  3. Masarie Patterns, home page, about and FAQ and contact, checked November 2026. Services, sample sewing, founder history, address. Company-stated.
  4. CFDA Production Directory, Prange Apparel LLC, checked November 2026. Directory listing; the company website it links to did not load.
  5. US Bureau of Labor Statistics, Quarterly Census of Employment and Wages, NAICS 315 and 3152, private ownership, annual averages 2015 to 2025 (Davidson County, Nashville metro area, Tennessee, North Carolina, Georgia, California, Los Angeles County, United States), downloaded November 2026.
  6. US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, sewing machine operators (51-6031), Nashville-Davidson-Murfreesboro-Franklin and Los Angeles-Long Beach-Anaheim metro areas, Tennessee and United States, via the BLS public data API, November 2026.
  7. 16 CFR Part 323, Made in USA Labeling Rule. eCFR, checked November 2026.

Every business named above appears in this source list. Locations, products, minimums, capacities and histories are the businesses' own published statements unless another source is cited; we did not visit them. No business here is a OneAim group member, and none paid to appear. Reviewed and updated 18 November 2026 by Will Godax.

OneAim Apparel places and manages production for brands with 80 documented clothing manufacturers in the United States. Expect a reply within 24 hours, a flat fee, and an order placed with the US factory in our group set up for your product. See how we work or get in contact.

Read more