Austin has one business we could confirm on its own website that cuts and sews clothing for outside designers: Stitch Texas, an apparel development facility on North Lamar Boulevard. It makes patterns, tech packs and first samples in Austin, and it places larger production through its owner, Lefty Production Co., which is based in Los Angeles. Most of the other "Austin clothing manufacturers" you will find are print and embroidery shops that decorate garments made elsewhere, one-off dressmakers, or landing pages for companies in other countries.
The federal numbers fit that picture. Travis County averaged 134 private-sector apparel manufacturing jobs across 19 establishments in 2025, according to the Bureau of Labor Statistics. Texas as a whole had 4,650, and most of them sit in Dallas County and El Paso County, not in Austin. This guide covers what each Austin business says it does, what it says it cannot do, and where the wider Texas sewing base is when your order outgrows the city.
About us: OneAim places and manages production with documented clothing factories in the United States. The businesses below are independent and are listed from their own public websites. None of them is a member of our group. What OneAim does instead: we place your production with a documented factory in our group built for your product.
The short list
- One Austin shop sews for designers. Stitch Texas cuts and sews your first sample in house, but asks you to supply the fabric and does not buy it for you.
- Production is placed through Los Angeles. Stitch Texas says its owner, Lefty Production Co., runs production of hundreds or thousands of units, at home and abroad. Ask where your run will be sewn.
- Print shops are not manufacturers. Austin's long-running screen printers decorate blank garments; they do not make patterns or cut and sew.
- Austin is a small part of Texas apparel. Travis County had 134 apparel manufacturing jobs in 2025, against 1,346 in Dallas County and 905 in El Paso County (BLS QCEW).
- Texas held its ground better than the US. State apparel manufacturing jobs went from 4,873 in 2015 to 4,650 in 2025; the US fell 42% over the same years.
- Austin sewing wages are not low. Sewing machine operators in the Austin metro averaged $17.57 an hour in May 2025, above the Texas mean of $15.59 (BLS OEWS).
Free estimate: calculate your landed cost with our garment cost calculator in about a minute. No email needed.
Austin apparel makers at a glance
If you want clothing made in Austin, the honest answer depends on what "made" means for your product. Patterns, tech packs and a first sample you can try on: yes, in town. A printed or embroidered tee on a blank: yes, from several long-running shops. A cut-and-sew production run of a few hundred pieces sewn inside the city: we could not confirm one business that publishes that service on its own site.
| Business | Where | What its own site says it does | What it is not |
|---|---|---|---|
| Stitch Texas | North Lamar Blvd, Austin | Design consultation, patterns, tech packs, first samples cut and sewn in house; production through Lefty Production Co. | Not a bulk sewing floor in Austin; does not buy fabric for you |
| Austin Screen Printing and Embroidery | Cross Park Dr, Austin | Screen printing, embroidery and promotional products on blanks | Decoration only; no patterns or cut and sew |
| Porkchop Screenprinting | East Riverside Dr, Austin | Screen printing, embroidery, DTG and DTF printing | Decoration only; no patterns or cut and sew |
| Custom Sewing by June | Home-based, Round Rock area | Dressmaking, alterations, tailoring, curtains | One-off custom sewing, not production runs |
| ACC Fashion Incubator | Austin Community College | A 12-month Designer-in-Residence programme with studio space and equipment | A training and incubation programme, not a contract factory |
All five were checked on their own websites in November 2026. The last column is our reading of what each one publishes; confirm with the business before you plan around it.
How we checked Austin apparel businesses
We started from the names that appear in Austin manufacturer searches, production directories, local press and an earlier version of this guide, then opened each business's own website. We counted a business as a maker only if its own site passed three tests.
- It works and is current. The site loads, belongs to the business, and describes what it does today.
- It places the work in the Austin area. The site names Austin, or a nearby town, as where it works, not only where it sells or ships.
- It cuts and sews for other designers. Samples or production for outside brands, not only decoration on blanks, its own label, or alterations.
Businesses that fail the third test are still useful, so we list the ones a founder is most likely to meet and label them for what they are. Where a fact is a company's own statement, we say so. We did not visit any of these businesses, and none of them paid to appear.
1. Stitch Texas, North Lamar (development and first samples)
Stitch Texas describes itself as a female-owned apparel development facility in Austin, in business since 2014. Its contact page gives its address as 5555 North Lamar Boulevard, Suite K-125, and says it does not take walk-in consultations: you book an appointment once you are onboarded as a client. Its home page says it specialises in medical uniforms and a full range of custom garments, and serves healthcare providers, emerging fashion labels and entrepreneurs.
Its story page says the company was launched in 2014 by Vesta Garcia, who set out to bring computer-aided pattern making and large-format plotting to apparel development in Austin. The same page says Stitch Texas was acquired by the owner of Lefty Production Company in early 2022, and that it now offers apparel manufacturing both domestic and overseas through Lefty.
What it says it does in Austin
The development page is the most concrete part of the site. It lists technical sketches, production patterns made in Tukatech software, and a first sample: in its own words, it cuts and sews the first sample of your design using the materials you provide. Local clients can pick the sample up at the studio, and others get it shipped. Fittings are done in person with a live fit model or by sending you the sample, followed by pattern revisions.
When development is complete, the studio says it sends your pattern card as a PDF and as a DXF file, the industry standard format, so you own the files and can take them to another manufacturer. It also builds tech packs, which it says can include technical illustrations, points of measure, callouts, a bill of materials, graded specs, label and hang tag details and ISO stitch classes.
Its specialties page lists men's wear, women's wear, children's wear, swimwear, lingerie, athletic wear, accessories and non-apparel sewn goods. Its capabilities list includes rotary knife cutting, sample making, single needle, overlock and zig zag sewing, buttons and buttonholes, and packing and shipping. A separate page presents bulk medical scrubs for healthcare buyers in Dallas, Austin and Houston, with custom colours and logos.
How it prices and runs a project
The services page says Stitch Texas sells flat-rate packages rather than hourly work, with discounts based on the number of designs. The development page adds a required monthly management service covering the whole project, which it says includes access to its sourcing contacts, bi-weekly phone calls with an account manager and storage of your fabric and trims. The FAQ says your first step is a phone call with an account manager, then a design consultation with your account manager and a pattern maker, in person or online, and that you must bring reference samples.
What it cannot do
Buy your fabric. The FAQ says the team will guide your search for fabric and share its vendors, but does not directly purchase your fabric for you. Budget the time to order fabric and trims yourself.
Give a timeline before the sample. The FAQ says lead times are extremely difficult to predict before samples are approved, and that for domestic production it needs all fabric and trims in house before it can give you a time and action calendar.
Sew bulk in Austin, as far as its site says. The site describes Austin as the place where designs are developed and patterns are made, and says full-scale production of hundreds or thousands of units runs through Lefty Production Co., domestically and around the world. Lefty's own site describes it as a development house and manufacturer based in Los Angeles that produces batches large and small, with low minimums for clients who develop their garments with it. If your plan depends on a "Made in USA" label, ask before you sign which country and which city each production run will be sewn in, and get the answer in writing.
A 2022 trade article on the acquisition, quoting Lefty's co-founder Marta Miller, said Stitch Texas then focused on product development and sampling for 75 clients across the southern United States, kept its four full-time employees, and that clients' projects could be sewn at Lefty's Los Angeles factory in the near term while a Texas production arm was planned. Treat those as figures from 2022; the studio's current site does not repeat them.
2. Austin print and embroidery shops (decoration, not manufacturing)
Austin has a deep bench of shops that put logos and artwork on garments. They are the right call for merch, uniforms with a logo, and band or event tees. They are not clothing manufacturers: they buy finished blank garments and decorate them, so they cannot make your pattern, grade your sizes or sew a design of your own.
Austin Screen Printing and Embroidery
Its home page says it has made custom t-shirts and embroidery locally in Austin since 1975, puts logos on t-shirts, hats, hoodies, polos and promotional products, and works from 8613 Cross Park Drive. It quotes a standard turnaround of 10 business days with a rush service, and lists its presses as five automatic and two manual, plus DTF printing. What it cannot do: nothing on its site offers patterns, samples or cut-and-sew production.
Porkchop Screenprinting
Porkchop says it has more than 20 years of experience in custom screen printing and embroidery, with a showroom on East Riverside Drive. It prints with plastisol and water-based inks, offers discharge, foil and oversized printing, and uses direct-to-garment and direct-to-film printing for orders of one or ten shirts. What it cannot do: like Austin Screen Printing, it decorates garments it sources; it does not describe making garments from a pattern.
One practical point: a decoration quote and a manufacturing quote are different things. A print shop prices ink on a blank you choose from a catalogue. A cut-and-sew quote prices your fabric, your pattern, your sizes and your construction, and it usually needs an approved sample before it means anything.
3. One-off sewing and the ACC Fashion Incubator
Custom Sewing by June is a home-based seamstress serving Round Rock, Pflugerville, Austin and Cedar Park, according to its site, with 35 years of sewing experience. It offers dressmaking, bridal and formal wear, alterations, tailoring and home items such as curtains and pillows. That is useful for a single garment or a costume. It is not a production service, and the site does not offer runs for a clothing brand.
The ACC Fashion Incubator at Austin Community College is the other name founders meet. Its site describes a 12-month Designer-in-Residence curriculum, studio space that designers rent, and access to equipment such as Juki industrial sewing machines, a Gerbercutter Z1 automatic cutter and Accumark 2D and 3D pattern-making software. It is a programme you apply to, not a contract factory you send a tech pack to, so treat it as a place to learn and develop rather than a supplier.
Checked and left out
Several names that appear in Austin searches did not pass. Fabriclore runs an Austin, Texas garment manufacturing page, but its own site gives its address as the Malviya Nagar Industrial Area in Jaipur, India. That page is a landing page for an overseas supplier, not an Austin facility.
We also left out an East Austin sewing studio that local press covered in 2020, because its web address is now listed for sale; a business that cut-and-sew directories place in Austin but whose own site sells car seat interiors; and a directory listing for which we could find no company website at all. Directory listings are often years out of date, so check every name on its own site before you send a tech pack.
How much clothing is made in Austin?
Not much, and the federal data says so. The Bureau of Labor Statistics counts private-sector apparel manufacturing jobs (NAICS 315) by county in its Quarterly Census of Employment and Wages. Travis County averaged 134 such jobs across 19 establishments in 2025. The count has roughly doubled from 64 jobs in 2015, but it peaked at 153 in 2022 and has stayed between 121 and 153 since 2021.
The pay data says what kind of jobs these are. Travis County's apparel manufacturing jobs paid an average of $92,589 in 2025. Sewing machine operators across all industries in the Austin metro area had a mean annual wage of $36,550 in May 2025. A workforce paid about two and a half times the sewing wage on average is not mostly sewing operators. Brand head offices, design teams and management can be counted in the same industry code, so the county number describes the apparel business in Austin, not its sewing floors.
The cut-and-sew part of the industry (NAICS 3152) is smaller still: 45 jobs in 12 establishments in Travis County in 2025. For the wider Austin metro area, the latest published figure is for 2023, when it had 198 apparel manufacturing jobs in 34 establishments.
Where the wider Texas sewing base is
If Austin is the place to develop a product, the rest of Texas is where most of the state's sewing jobs are. In 2025 Dallas County had 1,346 private apparel manufacturing jobs in 66 establishments, El Paso County had 905 in 21, and Harris County, which covers Houston, had 707 in 47. Tarrant County, around Fort Worth, had 263, and Bexar County, around San Antonio, had 149. Travis County's 134 is about 3% of the Texas total.
El Paso stands out for actual sewing work: its cut-and-sew segment alone had 833 jobs in 15 establishments in 2025. Across Texas, the cut-and-sew segment had 3,111 jobs in 257 establishments.
We profile the makers in those cities elsewhere, so this guide does not repeat them. Our Texas clothing manufacturers guide checks the state's main factory clusters one by one, and our Houston clothing manufacturers guide goes deeper on that city's small shops and its industrial workwear sector.
Texas has held up better than the US
Texas averaged 4,873 private apparel manufacturing jobs in 2015 and 4,650 in 2025, a fall of under 5%, with a high point of 5,672 in 2019. Over the same years the number of establishments in the state rose from 264 to 351. The United States fell from 135,263 jobs to 78,794, a 42% fall, and Los Angeles County fell from 41,193 to 18,842.
More establishments with a similar number of jobs means smaller shops on average. That fits the Austin list above: development studios, sample rooms and decorators, rather than large sewing floors.
What sewing labour costs in Austin
The BLS Occupational Employment and Wage Statistics program counts sewing machine operators across all industries, not only clothing. In May 2025 the Austin metro area had 380 of them, with a mean wage of $17.57 an hour. The Dallas-Fort Worth metro had 2,420 at $16.92, the Houston metro 1,270 at $16.51, the El Paso metro 720 at $11.84 and the San Antonio metro 360 at $15.28. Texas as a whole had 6,950 at $15.59, and the US mean was $18.08.
Two things follow. Austin is not a cheap place to sew within Texas: its mean is the highest of the five metros. And it has few operators, so a shop that wants to add a production line here has a small pool to hire from. In a small batch, though, labour per minute rarely decides the price. The pattern, the sample rounds and the setup on each style are priced per project, and those are what a development studio in Austin is built to do.
When Austin is the right place to start
- You have an idea, not a tech pack. A development studio that sketches, patterns and samples in town shortens the first loop.
- Fit is the hard part. In-person fittings with a live fit model, then pattern revisions, are on offer locally.
- You want files you own. A pattern card in DXF and a full tech pack travel with you to any factory later.
- Your product is printed or embroidered blanks. Austin's decorators have long track records and quick turnarounds for that.
- You already have fabric and trims. The local studio expects you to supply them, so arriving with fabric saves a step.
When to produce elsewhere in Texas or the US
- Your run is in the hundreds of pieces or more. No Austin business we checked publishes in-city production capacity at that scale.
- You need fabric bought for you. A full-package factory buys fabric and trims as part of the job; the Austin studio does not.
- You need a firm delivery date now. A factory with an approved sample and materials in house can commit to a calendar; a development studio says it cannot before then.
- You need every unit sewn in the US. Ask any shop that places production for you where each run is sewn, because some offer overseas options too.
- You have a reorder on a deadline. A larger factory with steady capacity is easier to book for repeat runs.
Many Austin brands will do both: develop the pattern and first samples in the city, then send the approved sample and tech pack to a factory that can run the quantity. Our clothing sample rounds playbook walks through how to get from first sample to production approval.
How to brief an Austin studio
Stitch Texas asks for reference samples at the first consultation, and every factory after it will ask for the same basics. Arrive with four things.
- Reference garments. A physical sample shows fabric weight, stretch and construction better than any description.
- Your fabric plan. A short list of fibre blends, colourways or prints you like; the studio's FAQ asks for exactly this.
- Your quantity by style, colour and size. Even a rough number decides whether you need a development studio, a small-batch shop or a factory.
- Your production question. Ask where the production run will be sewn and who owns the pattern files once you have paid for development.
If you do not have a tech pack yet, a development studio is the right first call; if you do, go straight to a factory that can quote your quantity.
Can you label it Made in Austin or Made in USA?
A city name is not a country-of-origin label. The FTC's Made in USA rule, 16 CFR Part 323, says a product may only be labelled Made in the United States when its final assembly or processing happens here, all significant processing happens here, and all or virtually all of its ingredients or components are made and sourced here.
That matters in Austin for two reasons. A garment developed in Austin but sewn abroad is not Made in USA, however much design work happened in Texas. And a garment sewn in Texas from imported fabric needs careful wording too. Keep "designed in Austin" marketing separate from the country-of-origin label, and check the rule before you print either.
Where to produce when Austin is too small
For Texas factories, start with our Texas clothing manufacturers guide. For the largest domestic base, see our Los Angeles clothing manufacturers guide, and for the national picture our USA apparel manufacturers guide. If your product is medical uniforms, our scrubs manufacturers guide covers US makers for that category.
This is where OneAim comes in: once your design and samples are ready, we place your production with a documented factory in our group built for the product.
Austin apparel production FAQ
Are there clothing manufacturers in Austin, Texas?
Few. On its own website we confirmed Stitch Texas, an apparel development facility on North Lamar Boulevard that makes patterns and tech packs and cuts and sews first samples, and places production through its owner, Lefty Production Co., in Los Angeles. Travis County had 134 private apparel manufacturing jobs in 19 establishments in 2025 (BLS QCEW).
Can I get a production run sewn in Austin?
We could not confirm an Austin business that publishes in-city cut-and-sew production on its own site. Stitch Texas says production of hundreds or thousands of units runs through Lefty Production Co., domestically and overseas, so ask where your run will be sewn.
Does Stitch Texas source fabric?
Its FAQ says it guides your fabric search and shares its vendors but does not directly purchase fabric for you. For domestic production it needs all fabric and trims in house before giving a timeline.
Are Austin screen printers clothing manufacturers?
No. Shops such as Austin Screen Printing and Embroidery and Porkchop Screenprinting decorate blank garments with printing and embroidery. They do not make patterns or cut and sew your own design.
Where is clothing actually sewn in Texas?
Mostly in Dallas County, with 1,346 private apparel manufacturing jobs in 2025, El Paso County with 905 and Harris County with 707 (BLS QCEW). Our Texas clothing manufacturers guide profiles the factories there.
Is sewing cheaper in Austin than elsewhere in Texas?
No. Sewing machine operators in the Austin metro averaged $17.57 an hour in May 2025, the highest of the five largest Texas metros, against a Texas mean of $15.59 (BLS OEWS).
OneAim places and manages production with 80 documented clothing manufacturers in the United States. Send the product, the quantity and your target date. Within 24 hours we reply, and we place the order with the US factory in our group that already makes it. Production, invoicing and shipping run directly between you and the factory. Flat fee, no mark-up.
Start my brief Get a tech pack ($79)References and data
- Stitch Texas, home page, our story, development, services, specialties, FAQ, Stitch Texas and Lefty Production Co., bulk medical scrubs and contact, checked November 2026. Company-stated.
- Lefty Production Co., home page, checked November 2026. Company-stated.
- Fashion Mannuscript, "Lefty Productions Co. Expands to Texas with New Acquisition", 1 April 2022. Acquisition details as reported in 2022.
- Austin Screen Printing and Embroidery and Porkchop Screenprinting, checked November 2026. Company-stated; decorators, not manufacturers.
- Custom Sewing by June, checked November 2026. Company-stated.
- Austin Community College, ACC Fashion Incubator, checked November 2026.
- Fabriclore, Austin garment manufacturing page, checked November 2026. Address listed in Jaipur, India.
- US Bureau of Labor Statistics, Quarterly Census of Employment and Wages, NAICS 315 and 3152, private ownership, annual averages 2015 to 2025 (Travis, Dallas, El Paso, Harris, Tarrant and Bexar counties, Austin metro area, Texas, Los Angeles County, United States), downloaded November 2026.
- US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, sewing machine operators (51-6031), Austin, Dallas-Fort Worth, Houston, El Paso and San Antonio metro areas, Texas and United States, via the BLS public data API, November 2026.
- 16 CFR Part 323, Made in USA Labeling Rule. eCFR, checked November 2026.
Every business named above appears in this source list. Locations, services and histories are the businesses' own published statements unless another source is cited; we did not visit them. No business here is a OneAim group member, and none paid to appear. Reviewed and updated 19 November 2026 by Will Godax.
Related guides
- Clothing manufacturers in Texas
- Clothing manufacturers in Houston
- Clothing manufacturers in Los Angeles
- Nashville clothing manufacturers