Portland has clothing manufacturers, but not many, and most of them are small studios rather than factories. We checked four that cut and sew garments in the city, each on its own website in November 2026: Portland Garment Factory, Dehen 1920, Langlitz Leathers and Graziano & Gutierrez. Only one of them, Portland Garment Factory, is set up as a custom cut-and-sew house for outside brands. The other three make their own lines, and what each will or will not do for you is spelled out below.
The government numbers explain why the list is short. Oregon's private apparel manufacturing industry averaged 809 jobs across 84 establishments in 2024, according to the Bureau of Labor Statistics. That is the whole state. Multnomah County, which contains Portland, accounted for 437 of those jobs in 34 establishments. This guide sets out the four makers, one well-known sewing factory we checked and left out, what the data says about sewing labour and wages in the Portland metro, and how to plan a run when Portland is too small for it. Every company and figure is listed in the Sources section at the end.
About us: OneAim places and manages production with documented clothing factories in the United States. The companies below are independent Portland businesses listed from their own public websites. They are not members of our group. What OneAim does instead: we place your production with a documented factory in our group built for your product.
The short list
- Four makers, one contract shop. Portland Garment Factory offers custom cut and sew with low minimums. Dehen 1920, Langlitz Leathers and Graziano & Gutierrez sew in Portland but mainly make their own lines.
- A small industry. Oregon apparel manufacturing averaged 809 private-sector jobs in 84 establishments in 2024; Multnomah County had 437 jobs in 34 of them, about 13 people per establishment (BLS QCEW).
- Fewer jobs, more shops. From 2015 to 2024 Oregon apparel jobs fell 18%, from 991 to 809, while the number of establishments rose 35%, from 62 to 84.
- A thin sewing workforce. The Portland metro employs 630 sewing machine operators, against 9,310 in the Los Angeles metro (BLS OEWS, May 2025).
- Wages above the national mean. Portland metro sewing machine operators earn an annual mean of $43,510, against $37,600 nationally.
- Check the label before you print it. Graziano & Gutierrez sews in Portland from fabric hand-woven in Mexico; under FTC rules, a garment like that is labelled Made in USA of imported fabric.
Free estimate: calculate your landed cost with our garment cost calculator in about a minute. No email needed.
Which clothing manufacturers actually sew in Portland?
Four businesses passed our check: each says on its own website that it cuts and sews garments in Portland, and nothing on the site points to the sewing happening elsewhere. They differ sharply in what they will make for someone else, so read the last column before you send an email.
| Maker | What it makes | Sewn where (its own words) | Works for outside brands? | Published minimum or lead time |
|---|---|---|---|---|
| Portland Garment Factory | Custom cut and sew: apparel, bags, soft goods, PR kits, interiors | Zero-waste creative factory, Portland address | Yes, custom cut-and-sew is a listed service | No number; says it specializes in low-MOQ production |
| Dehen 1920 | Heavyweight wool sweaters, varsity and club jackets, overshirts | "Made by us in Portland, Ore USA" | Mainly its own label; collaborations for events and promotions | Not published |
| Langlitz Leathers | Made-to-measure leather motorcycle jackets, vests, pants | Made in Portland by its own team | No, sells custom garments direct to riders | About 12 months from deposit |
| Graziano & Gutierrez | Made-to-order shirts, jackets and trousers in hand-woven cloth | Cut and sewn in its Portland studio | No, its own label | 4 to 5 weeks before shipping |
All four were checked on their own websites in November 2026. "Works for outside brands" is our reading of what each company publishes; confirm availability with the company before you plan around it.
How we checked these Portland makers
We started from the city's own list rather than from search results. Prosper Portland, the city's economic development agency, runs an Athletic and Outdoor industry program with a cut-and-sew directory. That directory mixes factories with sample studios, sewing classes, packaging suppliers and a university design program, so a listing is a lead, not proof. We then opened each company's own website and kept only businesses that met three tests.
- It exists and is in Portland. The company's own site loads and gives a Portland location.
- It sews garments here. The site says the cutting and sewing happen in Portland, not that a Portland office arranges production somewhere else.
- Nothing points overseas. Where a company uses imported materials, we say so in its entry. None of the four says its garments are sewn outside the US.
We left out businesses whose website did not load or blocked our checks, studios that only make samples, sewing schools and companies that say they do not take clothing work. One of those, Spooltown, is a real and well-equipped Portland sewing factory, and we explain below why it is not on this list. Where a figure is a company's own statement, we say so. We did not visit the factories.
The four Portland clothing makers
1. Portland Garment Factory: custom cut and sew for brands
Portland Garment Factory, or PGF, is the one business on this list built to make things for other people. Its home page describes a zero-waste creative factory working with designers, brands, agencies and artists, from custom pieces to streamlined cut-and-sew production, and its custom cut-and-sew page puts the scope plainly: if it starts with fabric, the company says, it can make it, from custom apparel to bags, flags and interiors.
That breadth is the point to understand before you brief them. PGF's own FAQ says that while it does apparel, it also creates custom bags, soft sculptures, seating, curtains and PR kits, and its other services include art fabrication and retail and experiential fabrication. A clothing brand is one of several kinds of client. On minimums, the same FAQ says PGF specializes in low-MOQ, high-quality production for brands and creatives, without publishing a number.
Its about page says the company was established in 2008, is a certified B Corporation and a certified woman-owned business through WBENC, and was named Manufacturer of the Year in the 11 to 50 employee category by the Portland Business Journal in 2020. Watch for: PGF suits short, design-heavy runs, collaborations, uniforms and merchandise. Ask for a quote per style and per colour, and ask how many units their low-MOQ production starts at for your garment, because the site does not say.
2. Dehen 1920: a 1920 knitting mill that still sews in Portland
Dehen Knitting Company was founded in Portland in 1920, and its factory page says it still produces its goods in Portland: classic heavyweight apparel such as varsity sweaters, varsity jackets and riding sweaters. The page adds that the company resisted pressure to move manufacturing outside the United States, and that its Dehen 1920 line launched in 2011. Its home page carries the line "Made By Us In Portland, Ore USA", and its shop lists wool sweaters, cardigans, varsity and club jackets, overshirts and rugby shirts.
Dehen's own listing in the Prosper Portland directory describes knit, cut and sewn capabilities under one roof. It says the Dehen 1920 brand is the company's primary focus, and that it also works collaboratively with other brands on unique product for special events and promotion. In an interview published by the Alliance for American Manufacturing, the company described a 20,000-square-foot Portland factory employing about 26 people, knitting its own fabric from wool yarns bought in the Carolinas, and said that 98% of what it makes now carries the Dehen 1920 label.
Watch for: Dehen is not an open contract factory. For years it did private-label work, but it has moved almost entirely to its own brand. If you want a collaboration piece, such as a team or club jacket in heavyweight wool, approach it as a collaboration with an established brand, not as a cut-and-sew order.
3. Langlitz Leathers: made-to-measure leather since 1947
Langlitz Leathers has made custom motorcycle leathers in Portland since 1947. Its Made in the USA page says its garments and accessories are made in Portland by its own team, from leather it sources from American tanneries in Wisconsin, New York and California, and that the team cuts, sews and builds each garment by hand.
Its How We Work page describes the process in useful detail. Measurements are taken in the shop or by video call, a pattern grader adds fit notes, and one of two cutters cuts every garment by hand from the original paper patterns, rejecting about a third of the leather it receives. Each garment is then sewn from start to finish by one sewist, who signs it with initials and a serial number, and every piece goes through two inspections. The company's FAQ gives a current lead time of approximately 12 months from the date a deposit is placed, and says it sells directly to customers, except in Japan, where authorized dealers serve the market.
Watch for: Langlitz is a one-garment-at-a-time custom shop for riders, not a manufacturer for brands. We include it because it shows what Portland's garment trade does best: skilled, slow, high-value work that is cut and sewn in the city.
4. Graziano & Gutierrez: a made-to-order studio with imported cloth
Graziano & Gutierrez is a small label whose process page says every piece is patterned, cut and sewn to order by hand in its Portland, Oregon studio. Its about page says the brand was founded in 2018 by two design students in Cincinnati, that one founder relocated to Portland the following summer, and that the online store launched in 2020. The studio works on industrial machines: the process page names a double-needle walking-foot machine for heavy fabrics and an overlock machine that every piece runs through.
The fabrics are the important detail. The same page says they are hand-woven on pedal looms by artisan communities in Mexico, and the brand's policies page says garments are hand-made in the Portland studio and take 4 to 5 weeks before shipping, depending on fabric stock. Customers can ask for custom measurements or alterations before purchase.
Watch for: this is a one-person, made-to-order label, not a factory you can hire. The imported cloth also matters for anyone who wants to copy the model: a garment sewn in Portland from Mexican fabric is not simply Made in USA under the federal rules covered below.
Checked and left out: why Spooltown is not on the list
Spooltown appears in almost every list of Portland manufacturers, and it is a genuine factory. Its about page describes a women-owned sewing factory in Portland specializing in soft goods such as bags, pillows, linens, straps and aprons. Its production page lists minimums as low as 50 units per style and colour, rising to 10,000 units or more, and machinery geared to heavy-duty materials, wovens and leatherwork, including walking-foot machines, bartackers and a robotic cutting table.
But its own FAQ answers the question for clothing brands directly: Spooltown says it does not currently take on any clothing or knitwear projects. So it is the right first call for a tote, an apron, a strap or a leather patch to go with your collection, and the wrong call for the garments themselves. We kept it out of the four for that reason.
We also left out several names that appear on directory pages because we could not open a working company website for them, or because the site blocked our check. A directory line or a listicle mention is not evidence that a business sews garments today, so we do not name businesses we could not verify on their own site.
How big is Portland's apparel industry?
Small, and getting more fragmented. The Bureau of Labor Statistics counts private-sector apparel manufacturing jobs (NAICS 315) in its Quarterly Census of Employment and Wages. Oregon averaged 991 such jobs in 2015 and 809 in 2024, a fall of 18%. Over the same years the number of establishments rose from 62 to 84, up 35%.
Put those two lines together and the picture is clear: more, smaller shops. In 2024, Multnomah County held 437 of Oregon's 809 apparel manufacturing jobs, 54% of the state total, in 34 establishments. That is about 13 people per establishment, which is the size of a studio or a workroom, not a production floor. Washington County, west of the city, added 66 jobs in 9 establishments.
Oregon has held up better than the country as a whole. US private apparel manufacturing employment fell from 135,263 in 2015 to 82,256 in 2024, a drop of 39%, with 6,340 establishments left. Oregon's decline over the same period was less than half as steep, which fits a market of small makers selling high-value goods rather than competing on price.
Who sews in the Portland metro?
About 630 sewing machine operators, according to the BLS Occupational Employment and Wage Statistics for May 2025. The Portland metro area in that data set includes Vancouver, Washington, and Hillsboro. For comparison, the Los Angeles metro employs 9,310 sewing machine operators, almost 15 times as many, and the Seattle metro 1,060.
The occupation covers sewing for garments and for non-garment products such as bags, upholstery and outdoor gear, so the chart measures sewing labour in general, not apparel capacity alone. Read it as a measure of depth: in a metro with 630 operators spread across many small shops, a rush order or a sudden reorder has few places to go.
The same BLS data breaks out the other sewing trades in the Portland metro. The numbers are small enough to list in full.
| Occupation (Portland metro, May 2025) | Employment | Annual mean wage |
|---|---|---|
| Sewing machine operators | 630 | $43,510 |
| Upholsterers | 200 | $47,050 |
| Tailors, dressmakers and custom sewers | 80 | $50,070 |
| Textile cutting machine setters, operators and tenders | 80 | $41,240 |
Source: BLS Occupational Employment and Wage Statistics, May 2025, Portland-Vancouver-Hillsboro metropolitan area. Other sewing occupations had too few workers in the metro for the BLS to publish an estimate.
What does sewing labour cost in Portland?
More than the national average, and slightly less than Seattle. Portland metro sewing machine operators earned an annual mean wage of $43,510 in May 2025, against $42,260 for Oregon as a whole and $37,600 for the United States. The median hourly wage in the Portland metro was $20.18.
A wage is only one input, but it lets you sanity-check a quote. At the median hourly wage of $20.18, one minute of sewing time costs about 34 cents in wages alone. A garment that takes 25 minutes to sew would carry about $8.41 in direct sewing wages before payroll taxes, cutting, finishing, overhead, fabric, trims and the maker's margin. The 25 minutes is an illustration, not a measured standard: ask the maker for its own estimate for your style, and expect small shops to quote above a simple wage calculation, because setup and sampling are spread over fewer pieces.
Oregon's apparel manufacturing payroll points the same way. The QCEW puts the average annual pay in the state's apparel manufacturing establishments at $54,092 in 2024, a figure that covers every job in those establishments, from sewing to management, so it runs higher than the sewing-operator wage above.
Can you label a Portland garment Made in USA?
Yes, if the materials are American too. The FTC's Made in USA rule, 16 CFR Part 323, says a product may only be labelled Made in the United States when its final assembly or processing happens here, all significant processing happens here, and all or virtually all of its ingredients or components are made and sourced here.
The four makers above show the range. Langlitz Leathers sources its leather from American tanneries and cuts and sews in Portland, which is the profile the rule describes. Graziano & Gutierrez sews in Portland from cloth woven in Mexico, and for that case the textile labelling rules in 16 CFR Part 303 give Made in USA of imported fabric as the example wording. Dehen knits its own fabric in Portland from yarn it buys in the Carolinas. A city name on the label, such as Made in Portland, does not replace the country-of-origin rules; ask your maker where each component comes from before you print anything.
Which Portland maker fits your brief?
- A short run of a new style, merchandise, uniforms or a collaboration: start with Portland Garment Factory, the only one of the four that lists custom cut and sew for clients as a service.
- A heavyweight wool jacket or sweater with your club or event on it: ask Dehen 1920 about a collaboration, and expect it to be its product, made with you, rather than your pattern made by them.
- A custom leather garment for yourself: Langlitz Leathers, with a lead time of about a year.
- Bags, straps, aprons or leather labels to go with a collection: Spooltown, which runs from 50 units per style and colour but does not take clothing.
- A first production run in the hundreds or thousands of pieces: none of the four is built for it. Plan the sampling in Portland if you like, and the bulk run where the capacity is.
What to send a Portland maker
Small shops answer clear briefs first, because every unclear one costs them a sample they cannot charge for. Send these with your first email:
- A flat sketch or reference garment and, if you have one, a tech pack with measurements per size.
- Fabric: what it is, where it comes from, and whether you supply it or need the maker to source it.
- Quantity per style, per colour and per size, and whether this is a one-off run or a programme you expect to repeat.
- Trims and labels: zips, snaps, care and content labels, and whether you want the maker's label or none.
- Target delivery date, so the maker can tell you straight away whether its calendar fits.
- Your budget range per unit, which saves both sides a round of quotes if it is far apart.
If you do not have a tech pack yet, a single-style pack with measurements and construction notes usually saves a sample round. For the same city formula further north, see our guide to Seattle clothing manufacturers, and for heavy knits like Dehen's, our guide to US cardigan manufacturers.
Where to produce when Portland is too small
Stay in the US and go where the sewing workforce is. The Los Angeles metro employs 9,310 sewing machine operators, the most of any West Coast metro, and our Los Angeles clothing manufacturers guide is the natural next stop. For other categories and regions, our USA apparel manufacturers guide covers the wider domestic market.
A practical split many small brands use is to develop close to home and produce where the capacity is. Fit sessions and pattern changes are easier when you can visit, while a repeat programme needs a factory with enough operators to absorb a reorder. This is where OneAim comes in: once your volume is past what a Portland studio can take, we place your production with a documented factory in our group built for the product.
Portland clothing manufacturers FAQ
How many clothing manufacturers are there in Portland?
Few. Multnomah County, which contains Portland, had 34 apparel manufacturing establishments and 437 jobs in 2024 (BLS QCEW), about 13 people each. We verified four businesses that cut and sew garments in Portland on their own websites: Portland Garment Factory, Dehen 1920, Langlitz Leathers and Graziano & Gutierrez.
Which Portland clothing manufacturer takes work from outside brands?
Portland Garment Factory is the one of the four that lists custom cut and sew as a service and says it specializes in low-MOQ production. Dehen 1920 focuses on its own label but works collaboratively with other brands on product for special events and promotion.
Does Spooltown make clothing?
No. Spooltown is a women-owned sewing factory in Portland that makes soft goods such as bags, pillows, linens, straps and aprons, with minimums as low as 50 units per style and colour. Its own FAQ says it does not currently take on any clothing or knitwear projects.
Is Dehen 1920 still made in Portland?
Yes. Dehen's factory page says it continues to produce its goods in Portland, where it has been since 1920, and its listing describes knit, cut and sewn capabilities under one roof. The company has said that 98% of what it makes now carries its own Dehen 1920 label.
How many sewing machine operators work in the Portland area?
About 630 in the Portland-Vancouver-Hillsboro metro area in May 2025, according to the BLS. The Los Angeles metro employs 9,310 and the Seattle metro 1,060.
How much do sewing machine operators earn in Portland?
The annual mean wage in the Portland metro was $43,510 in May 2025, with a median hourly wage of $20.18. The national annual mean was $37,600.
Can a garment sewn in Portland from imported fabric be labelled Made in USA?
Not without qualification. Under the FTC rule, all or virtually all components must be made and sourced in the US. For a garment made here from imported fabric, the textile labelling rules give Made in USA of imported fabric as the example wording.
OneAim places and manages production with 80 documented clothing manufacturers in the United States. Send the product, the quantity and your target date. Within 24 hours we reply, and we place the order with the US factory in our group that already makes it. Production, invoicing and shipping run directly between you and the factory. Flat fee, no mark-up.
Start my brief US factory directory ($49)References and data
- Portland Garment Factory, home page, custom cut and sew manufacturing and about, checked November 2026. Services, product range, low-MOQ statement, founding year, certifications, award. Company-stated.
- Dehen 1920, home page and factory and history page, checked November 2026. Founding, Portland production, product range, 2011 line launch. Company-stated.
- Prosper Portland, Athletic and Outdoor cut and sew directory, checked November 2026. Dehen's own listing (knit, cut and sewn under one roof; collaborations); directory contents.
- Alliance for American Manufacturing, interview with Dehen, checked November 2026. Factory size, staff, yarn origin, share of own-label production.
- Langlitz Leathers, home page, Made in the USA, How We Work, history and FAQ, checked November 2026. Founding, Portland production, tannery states, process, lead time, sales channels. Company-stated.
- Graziano & Gutierrez, process, about and policies, checked November 2026. Portland studio production, Mexican hand-woven fabrics, founding, machines, made-to-order timing. Company-stated.
- Spooltown, about, factory production and FAQ, checked November 2026. Soft goods focus, minimums, machinery, no clothing or knitwear projects. Company-stated.
- US Bureau of Labor Statistics, Quarterly Census of Employment and Wages, NAICS 315, private ownership, annual averages 2015 to 2024 (Oregon, Multnomah County, Washington County, United States), downloaded November 2026.
- US Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025: sewing machine operators by metro area, Oregon and United States; Portland-Vancouver-Hillsboro metro sewing occupations. Queried November 2026.
- 16 CFR Part 323, Made in USA Labeling Rule; 16 CFR Part 303, Textile Fiber Products Identification Act rules. eCFR, checked November 2026.
Every company named above appears in this source list. Locations, products, minimums, lead times and production sites are the companies' own published statements unless another source is cited; we did not visit the factories. The sewing-time cost example is an illustration on the BLS wage, not a quote. No company here is a OneAim group member, and none paid to appear. Reviewed and updated 15 November 2026 by Will Godax.
Related guides
- Clothing manufacturers in Seattle
- Clothing manufacturers in San Francisco
- Clothing manufacturers in Los Angeles
- Jacket manufacturers