Clothing Manufacturing in Bangladesh: 2026 Guide
By Will Godax, Sourcing Specialist at OneAim Apparel. Updated April 23, 2026.
Last updated: May 8, 2026, refreshed with FY2024-25 BGMEA export figures, RSC factory count, EBA transition timeline, and Q1 2026 FOB benchmarks.
Bangladesh shipped roughly $47 billion in ready-made garments during FY2024-25, holding its position as the world's second-largest apparel exporter behind China (BGMEA, 2025). The country's edge runs on three rails: duty-free access into the EU under Everything But Arms, the lowest fully loaded labor cost in mainstream Asian sourcing, and a vertically integrated knit base that competitors cannot replicate at the same scale.
The pitfalls are equally specific. Compliance overhead since Rana Plaza now stacks RSC, Nirapon, BSCI, and brand-specific audits on the same factory floor. Audit fatigue is real, monsoon delays bunch June through September shipments, and capacity on commodity basics tightens fast in Q3 holiday peak. LDC graduation in November 2026 also puts a clock on the EBA story.
Heads up: We're OneAim Apparel, a global sourcing agency, not a factory. We've placed brands across 14 countries since 2022. Operational data below comes from our actual sourcing pipeline of 47 Bangladesh factory quotes collected between January 2025 and March 2026. External sources are cited inline.
Key Takeaways - Second-largest apparel exporter. Bangladesh shipped $47B in RMG during FY2024-25, roughly 7.9% of global apparel trade (BGMEA, 2025; WTO, 2024). - Duty-free into EU and UK. EBA grants 0% tariff on apparel HS codes through Bangladesh's LDC graduation transition window, ending 2029 (European Commission, 2024). - Cotton knit specialist. Cotton knitwear accounts for about 56% of RMG export value, with 800M+ jeans pairs exported annually (BGMEA, 2025). - MOQs floor at 1,000+. Tier-one compliant factories rarely quote under 5,000 units per color. The 1,000-piece floor is realistic only at small-mid factories. - Compliance footprint is deep. Over 2,400 factories have been remediated under the Accord and RSC since 2014, and 230+ hold LEED certification (International Accord, 2024; USGBC, 2024). - Labor cost remains the lowest in mainstream Asia. RMG minimum wage sits at 12,500 BDT ($114) per month, well below Vietnam, India, and Cambodia (Reuters, 2023).
Try it free: Calculate landed cost in 60 seconds with our garment cost calculator. No email required.
Definitions
- EBA (Everything But Arms)
- EU trade scheme granting duty-free, quota-free access to all products except arms and ammunition for Least Developed Countries, including Bangladesh through its 2026 graduation transition.
- GSP (Generalised Scheme of Preferences)
- EU framework reducing or removing import duties for developing countries. EBA is the most generous tier, GSP+ requires ratification of 27 international conventions.
- BGMEA
- Bangladesh Garment Manufacturers and Exporters Association, the apex trade body covering woven and knit export factories. Membership is the baseline credibility check.
- BKMEA
- Bangladesh Knitwear Manufacturers and Exporters Association, the parallel body for knit-focused factories, concentrated in Narayanganj and the Dhaka belt.
- Accord
- The legally binding 2013 Bangladesh Accord on Fire and Building Safety, signed by 200+ brands after Rana Plaza, which inspected 1,600+ factories before transitioning to the RSC in 2020.
- RSC (RMG Sustainability Council)
- Successor body that took over domestic execution of the Accord's safety inspection program, jointly governed by brands, factories, and trade unions.
- ILO (International Labour Organization)
- UN agency setting global labor standards. ILO Better Work Bangladesh runs factory-level compliance programs alongside RSC and Nirapon.
- ZDHC (Zero Discharge of Hazardous Chemicals)
- Industry initiative covering Manufacturing Restricted Substances Lists (MRSL) and InCheck wastewater reporting, mandatory at most tier-one Bangladesh dye houses.
- LWG (Leather Working Group)
- Audit standard for leather tanneries. Relevant for Bangladesh's small leather goods export segment in Hazaribagh and Savar tannery zones.
- ETI Base Code
- Ethical Trading Initiative's nine-point labor standard, frequently embedded in UK and EU brand supplier contracts and audited via SMETA 4-pillar.
Why does Bangladesh dominate cotton knitwear at scale?
Bangladesh holds 7.9% of global apparel exports, second only to China's 31.6% share, with cotton knitwear driving roughly 56% of FY2024-25 RMG export value (WTO, 2024; BGMEA, 2025). The country runs deeper in vertically integrated knit production than any peer.
The structural moat sits in three places. First, labor cost. The RMG minimum wage of 12,500 BDT ($114) per month is roughly 40% below Vietnam and 25% below India for equivalent skill bands (Reuters, 2023). Second, scale. More than 4,000 export-oriented factories employ about 4.4 million workers, mostly women (ILO, 2024).
Third, vertical integration. Big knit groups like DBL, Square, and Ha-Meem spin yarn, knit fabric, dye, and cut-and-sew on a single campus. That collapses three handoffs that elsewhere add 25 to 40 days of lead time. In our 47 Bangladesh quotes from 2025-2026, vertically integrated knit programs averaged 18 days faster from PO to FOB than equivalent Vietnam quotes.
The vulnerability is concentration. RMG accounts for roughly 84% of national merchandise exports, which means any brand sourcing here should model FX exposure on the taka and watch monetary policy moves, not just factory quotes.
Citation capsule: Bangladesh's RMG sector exported about $47B in FY2024-25, roughly 84% of national merchandise exports, employing 4.4M workers across 4,000+ registered export factories with cotton knitwear delivering 56% of export value (BGMEA, 2025; ILO, 2024).
[INTERNAL-LINK: where to manufacture clothing in 2026 -> Pillar 1 hub overview]
Where are Bangladesh's main manufacturing clusters?
Four clusters carry nearly all export production: Dhaka, Gazipur, Narayanganj, and Chittagong, with Gazipur alone hosting more than 1,900 garment factories, the densest apparel district in the country (BGMEA Factory Directory, 2024). Each cluster carries a distinct product DNA that decides whether your program will fit.
Dhaka and Gazipur, the knit and woven-top heartland
Greater Dhaka, including Savar and Ashulia, holds the bulk of mid-to-large knit and woven factories serving H&M, Zara, Uniqlo, and Primark. Gazipur, just north, is the heartland of vertically integrated knit producers. Yarn-to-ship under one roof shaves real days off lead time.
Narayanganj, the denim and washing capital
Narayanganj, southeast of Dhaka, is the country's denim capital. Most laundries and wash houses sit here. Selvedge, raw, and heavily washed denim almost always traces back to a Narayanganj plant. Laser, ozone, and e-flow finishing have replaced manual stone wash at tier-one houses.
Chittagong, the woven bottoms and EPZ gateway
Chittagong hosts the country's largest Export Processing Zone and the main seaport. Woven bottoms, outerwear, and technical categories concentrate here. Proximity to the port cuts inland trucking by 3 to 5 days versus Dhaka-based shipping, which matters when air buffers are not available.
Find your factory: Browse the free factory directory preview, or unlock the premium directory for $39 to see 200+ vetted factories with direct contacts and MOQs.
Citation capsule: Bangladesh's apparel exports concentrate across Gazipur (1,900+ factories), Dhaka metro (1,200), Narayanganj (700, denim and wash specialists), and Chittagong (600, EPZ-based wovens and outerwear), with Chittagong port handling nearly all ocean exits (BGMEA Factory Directory, 2024).
[INTERNAL-LINK: vietnam vs bangladesh sourcing -> sibling country comparison]
Which categories does Bangladesh actually win on?
Cotton knitwear delivers about 56% of Bangladesh's RMG export value, with denim adding another 8 to 10% and woven shirts roughly 12% (BGMEA, 2025). The category strength is real but narrow. Push tailoring, structured outerwear, or technical synthetics through Bangladesh and the math stops working.
Cotton basics, the dominant category
T-shirts, polos, underwear, sleepwear, and basic fleece. Bangladesh wins because vertically integrated knit mills spin, knit, dye, cut, and sew on a single campus. The shade-to-shade consistency on a 50,000-piece run with 6 color splits is genuinely hard to replicate elsewhere at this price point.
Denim, mature and broad
The country exports more than 800 million pairs of jeans annually, with domestic mills like Envoy Textiles, Square Denims, and Pacific Jeans supplying fabric (Textile Today, 2024). Wash capability is world-class. Mid-tier wash houses now run laser and ozone routinely, not as premium add-ons.
Sweaters and knit programs at volume
If you need 30,000 units of a fine-gauge sweater with consistent gauge, hand, and shade, Bangladesh sweater factories in Mirpur and Ashulia compete directly with China on quality and beat it on EU landed cost. Below 3,000 units per color, Turkey and Portugal usually serve better.
Where Bangladesh underperforms
Structured tailoring, blazers, technical outerwear, and complex synthetic constructions sit in Vietnam, China, and Portugal's lane, not here. We've watched brands try to push blazers through knit-built Bangladesh factories and burn 6 months on fit issues that a Vietnam tailoring house would have solved in week three.
What MOQs and FOB pricing should you expect at 1,000+ units?
The realistic MOQ floor in Bangladesh is 1,000 pieces per style per color at small and mid-tier export factories, climbing to 5,000-10,000 pieces at tier-one compliant plants serving global retailers (McKinsey State of Fashion, 2025). Anyone marketing 200 or 500-piece Bangladesh runs is either a trader or a non-export sample room. Both bring downstream risk.
In our 47 Bangladesh quotes from January 2025 to March 2026, FOB Chittagong pricing for mid-spec programs at 1,000-unit volumes landed inside the bands below. Quotes vary with fabric source, trims, certification stack, and ship window.
| Product | Fabric spec | FOB USD (1,000 units) | Lead time |
|---|---|---|---|
| Cotton T-shirt (basic crew) | 180 gsm combed ring-spun | $2.80 to $3.60 | 60 to 75 days |
| Knit polo (pique) | 220 gsm cotton pique | $4.80 to $6.20 | 70 to 85 days |
| Fleece hoodie (pullover) | 320 gsm brushed-back | $6.50 to $9.00 | 75 to 90 days |
| Denim jean (5-pocket, stone wash) | 12 oz cotton denim | $7.50 to $11.00 | 90 to 110 days |
| Woven button-up shirt | 120 gsm cotton poplin | $5.00 to $7.20 | 75 to 95 days |
| Fine-gauge knit sweater | 12gg cotton blend | $9.50 to $13.50 | 95 to 120 days |
Sources: McKinsey State of Fashion, 2025; BGMEA, 2025; OneAim Apparel sourcing pipeline, 2025-2026.
The 1,000-piece reality check
A 1,000-piece floor sounds approachable but applies per style per color, not per total order. A brand booking 1,000 tees across 4 colors is really running 250 per color, which falls below most factories' minimum cut. Either consolidate to 1-2 colors or budget for fabric overage.
Fabric MOQs hide more than garment MOQs
A factory might accept 1,000 garments but require 3,000 meters of custom-dyed fabric. The fabric minimum, not the garment minimum, is where surprises live. Always confirm both before signing the PI.
Pricing pressure when you push below the floor
Below 1,000 pieces, expect 25 to 45% markup or outright refusal. Brokers will quote at any volume, but those quotes typically rebuild on actual production. Plan for the floor.
Skip 6 weeks of cold outreach: Our factory sourcing service shortlists 3 matched Bangladesh factories in 10 business days, starting at $490. Flat fee, no commissions.
Citation capsule: Realistic Bangladesh MOQs start at 1,000 pieces per style per color at small-mid factories and 5,000+ pieces at tier-one plants, with FOB Chittagong pricing for cotton T-shirts running $2.80 to $3.60 per unit at 1,000 volumes, roughly 15 to 30% below Vietnam (McKinsey State of Fashion, 2025; OneAim Apparel pipeline, 2026).
[INTERNAL-LINK: clothing manufacturing MOQ guide -> Pillar 2 process pillar]
How long do Bangladesh lead times actually run?
Standard PO-to-FOB lead times in Bangladesh sit at 75 to 120 days for knit programs and 90 to 130 days for denim or complex wovens, with peak-season Q3 production adding 15 to 25% on top (Apparel Resources, 2024). That window covers fabric production, trims, cut-and-sew, finishing, and pre-shipment QC.
Fabric production is the real bottleneck
In-house knit mills can turn cotton jersey in 15 to 25 days. Woven fabric from domestic mills runs 30 to 45 days. Imported fabric from China, common for technical or specialty constructions, adds another 20 to 30 days on inland and ocean legs.
Sampling and approvals eat 6 to 8 weeks
Budget 4 to 6 weeks for proto, fit, and pre-production samples combined. First-time programs with new factories run closer to 8 weeks. Treat sampling as a lead-time line item, not as pre-production prep that fits inside the calendar.
Monsoon and Q3 capacity crunch
June through September monsoon disrupts inland logistics and occasionally fabric drying schedules. Holiday-season Q3 demand bunches between August and October. Book Q4 capacity by May, or accept lead times stretching 25%.
Air freight as the buffer
Air shaves 25 to 30 days off landed-in but typically multiplies freight cost per kilogram by 8 to 12 times ocean. We use air for 5 to 10% of replenishment volume, never for full programs.
[INTERNAL-LINK: apparel lead-time benchmark by country -> Pillar 1 decision framework]
How does post-Rana-Plaza compliance actually work?
More than 2,400 factories have been inspected and remediated under the Bangladesh Accord and its successor RSC since 2014, with separate coverage from Nirapon for North American buyers, making Bangladesh's compliance footprint one of the deepest in global apparel (International Accord, 2024). Coverage is broad, but verification still matters because risk concentrates outside the formal pool.
The Accord, RSC, Nirapon stack
The legally binding 2013 Accord ran through 2021, focused on fire, building, and electrical safety at 1,600+ factories. The RSC took over domestic execution in 2020 under tripartite governance. Nirapon, the successor to the US-led Alliance, covers a smaller pool focused on North American buyers. Most large export factories now sit under at least one framework.
Audit fatigue is a real cost
A tier-one Bangladesh factory often hosts 12 to 18 audits per year, between RSC, Nirapon, BSCI, SMETA 4-pillar, WRAP, and brand-specific protocols. Operators have started pushing back on duplicative audits, and ILO Better Work Bangladesh now coordinates some streamlining, but the load remains heavy. Factor audit access lead times into your sampling timeline.
How to vet a Bangladesh factory in 2026
Ask for five things before any order: a current RSC or Nirapon safety certificate, a valid social audit (BSCI, SMETA 4-pillar, or WRAP) from the past 12 months, proof of BGMEA or BKMEA membership, the most recent fire and electrical inspection, and a signed no-subcontracting clause. Missing or "in renewal" answers are escalation triggers.
The single highest residual risk: unauthorized subcontracting
In our placements, the biggest compliance failure mode is unauthorized subcontracting, where a vetted factory pushes overflow work to an uninspected facility during peak. Contract language and unannounced site checks are the only defenses that hold up. Some buyers now embed RFID tracking on cut bundles to detect off-site work.
Running into nearshoring decisions? We offer 11-hour production consulting for $790 per project to map the full picture for your brand, or book a free 15-min call first.
Citation capsule: Bangladesh's compliance infrastructure now covers 2,400+ factories under the Accord and RSC frameworks since 2014, with Nirapon covering North American buyers, and 230+ factories holding LEED certification, while unauthorized subcontracting remains the primary residual risk for buyers (International Accord, 2024; USGBC, 2024).
What does the EBA, GSP+, and US tariff picture look like?
Bangladesh enters the EU duty-free under Everything But Arms and the UK duty-free under DCTS, while US apparel imports face standard MFN tariffs of 16.5 to 32% depending on HS code (European Commission, 2024; USITC HTS, 2024). Tariff treatment is often the deciding factor between Bangladesh and regional alternatives like Turkey or Morocco for EU-bound brands.
EU: Everything But Arms (EBA)
Bangladesh enjoys 0% duty on virtually all apparel HS codes entering the EU. A cotton T-shirt from Vietnam pays 12% MFN duty into the EU. From Bangladesh, zero. On a $50 retail tee, that's $1.50 to $2 of margin recovered per unit. LDC graduation is scheduled for November 2026, after which a three-year transition window keeps EBA active before benefits taper toward standard GSP rates.
UK: DCTS preferences
The UK Developing Countries Trading Scheme, which replaced GSP+ post-Brexit, grants Bangladesh duty-free access on nearly all apparel lines. Terms run broadly similar to EBA through the LDC transition period, ending in 2029 for most categories.
US: MFN applies, no GSP for apparel
The US does not extend GSP preferences to apparel, regardless of country. Cotton knit T-shirts (HTS 6109.10) pay 16.5% MFN. Cotton trousers (HTS 6203.42) pay 16.6%. Synthetic blends can climb to 32%. For US-bound programs, the EU duty advantage disappears, and the comparison resets to pure FOB and lead time.
Worked example: 5,000 cotton tees, EU vs US
5,000 tees at $3.20 FOB equals $16,000. Ocean to Rotterdam adds about $0.40 per unit, so $18,000 landed pre-duty. Into the EU under EBA: $0 duty, $18,000 total. Into the US at 16.5% MFN: $2,640 duty on the FOB value, totaling about $20,640 landed. Same factory, same goods, $2,640 of difference per 5,000 units.
Try it free: Calculate landed cost in 60 seconds with our garment cost calculator. No email required.
What are Bangladesh's biggest pitfalls in 2026?
Roughly 30% of first-time brand engagements with Bangladesh factories encounter at least one significant production issue, ranging from subcontracting discovery to fabric substitution to quality drift (Apparel Resources, 2024). Most are preventable if you know which signals to read before signing the PO.
Audit fatigue and certificate stacking
Tier-one factories juggle 12 to 18 audits a year. Some respond by accepting only the largest brand programs. Smaller brands get pushed to mid-tier factories where compliance depth thins. Vet the certification stack at the factory level, not just the group level.
Monsoon and Q3 capacity crunch
June through September monsoon disrupts inland trucking and fabric finishing. Q3 holiday peak runs August through October. Book early, or expect 15 to 25% lead-time stretch and tighter MOQ enforcement.
Capacity tightness on commodity basics
The same factories that win on $2.80 cotton tees also win every other brand's $2.80 cotton tee program. Capacity tightens in Q3, and pricing on rush programs can move 10 to 20% above base FOB.
"Tier-one compliant" claims without paperwork
If a factory cannot produce dated RSC, BSCI, or LEED certificates within 24 hours, walk. Real compliant factories have this paperwork ready instantly.
Suspiciously low quotes
A $1.80 FOB cotton T-shirt quote at 1,000 units is not a bargain. It's a warning. Either the factory is cutting corners on fabric, labor, or compliance, or the quote will revise upward after commitment.
LDC graduation clock
Bangladesh graduates from LDC status in November 2026. EBA continues through a three-year transition, but brands modeling 5-year sourcing plans should run a 0-12% EU duty scenario from 2029 onward.
Decision Framework: when does Bangladesh actually fit?
Bangladesh is the right choice when product volume, EU destination, cotton focus, and price discipline align. It is the wrong choice when any of those break.
Choose Bangladesh when:
- You're running 5,000+ units per color of cotton knit, denim, or basic fleece.
- Primary market is the EU or UK, and the EBA/DCTS duty-free advantage materially shifts your margin.
- Product DNA is cotton-driven, not technical synthetics, structured tailoring, or complex outerwear.
- You can absorb 75 to 120-day lead times and book Q4 capacity by May.
- Compliance discipline is real on your side: certified factories only, no-subcontracting clauses, pre-production site visits.
Choose somewhere else when:
- You're running under 1,000 units per color. Portugal, Turkey, or India fit better.
- Product is structured wovens, blazers, technical outerwear, or complex synthetic constructions. Vietnam or China outperform.
- Primary market is the US, where the EBA advantage disappears and the comparison resets to FOB and lead time.
- You need rapid turn under 60 days. Bangladesh's lead time floor sits above that.
- You cannot or will not run a pre-production factory visit. The compliance risk does not get managed remotely.
Talk to a real person: Book a free 15-min discovery call with our sourcing desk. No pitch, no upsell.
Frequently Asked Questions
Is Bangladesh cheaper than Vietnam for clothing manufacturing?
Bangladesh FOB prices typically run 15 to 30% below Vietnam for comparable cotton basics at 1,000 to 10,000 unit volumes, driven by labor cost and vertical knit integration (McKinsey State of Fashion, 2025). Vietnam pulls ahead on synthetics, technical outerwear, and complex construction. For cotton T-shirts, knit polos, and basic denim, Bangladesh almost always wins on unit cost and is competitive on landed cost into the EU under EBA.
Can small brands really manufacture in Bangladesh?
Yes, with the right factory match, but the realistic floor is 1,000 pieces per style per color at small-mid export factories. Tier-one compliant plants serving global retailers rarely quote under 5,000 units per color. Brands ordering under 500 units per style typically find better fits in Portugal, Turkey, or India. Always verify BGMEA membership and current social audit status before placing a first PO.
How long does shipping from Bangladesh to the US take?
Ocean freight from Chittagong to US East Coast ports runs 28 to 35 days door-to-door, including inland, ocean, and US customs clearance (Freightos, 2024). West Coast routes through Singapore or Colombo transshipment run 32 to 40 days. Air freight is 5 to 8 days but costs roughly 8 to 12 times ocean per kilogram, so it suits replenishment, not full programs.
Is Bangladesh still safe to source from after Rana Plaza?
Bangladesh's tier-one export factories now sit among the most rigorously inspected apparel facilities globally, with 2,400+ plants remediated under the Accord and RSC frameworks since 2014 (International Accord, 2024). Safety at compliant factories has genuinely changed. Risk concentrates in non-member factories and unauthorized subcontracting, which is why factory verification and contract language still matter on every program.
What happens when Bangladesh graduates from LDC status in November 2026?
Bangladesh loses automatic LDC preferences upon graduation but enters a three-year transition during which EU EBA and UK DCTS benefits continue, ending in 2029 for most categories. After transition, the country needs to qualify under standard GSP or GSP+ rules, which could mean partial duty reimposition on apparel. Brands modeling sourcing plans past 2029 should run a 0 to 12% EU duty scenario.
What's the realistic MOQ for cotton T-shirts in Bangladesh?
Realistic MOQs start at 1,000 pieces per style per color at small-mid export factories, with tier-one compliant plants requiring 5,000 to 10,000 units. The 1,000-piece floor applies per color, not per total order, so a 4-color program needs to commit 4,000 units minimum. Fabric MOQs run separately, often 3,000 meters for custom-dyed colors, which is where unexpected minimums most often surface.
Which Bangladesh cluster is best for denim?
Narayanganj is the country's denim capital, hosting most laundries and wash houses, plus major fabric mills like Envoy Textiles and Square Denims. The country exports more than 800 million pairs of jeans annually (Textile Today, 2024). For selvedge, raw, and heavily washed programs, Narayanganj is almost always the right cluster. Mid-tier wash houses now run laser and ozone routinely, not as premium add-ons.
How do I avoid unauthorized subcontracting in Bangladesh?
Embed a no-subcontracting clause in every PO, run unannounced pre-production site visits, and verify that the factory you're inspecting is the same one running production. Some brands now use RFID tracking on cut bundles to detect off-site work. In our placements, the highest single compliance failure mode is overflow work being pushed to uninspected facilities during Q3 peak, so contract language plus surprise site checks remain the only defenses that hold up.
Are Bangladesh factories actually sustainable?
Bangladesh hosts 230+ LEED-certified garment factories, more than any other country, including 9 of the world's 10 highest-scoring LEED apparel facilities (USGBC, 2024). BCI cotton adoption runs 40 to 60% at major vertically integrated groups, and ZDHC compliance is standard at tier-one dye houses. The sustainability story is real on paper, though it sits alongside legitimate concerns about wages, effluent, and water stress that brands should diligence directly.
What's the best payment term for first-time Bangladesh orders?
Standard terms are 30% deposit on PO, 70% against shipping documents (TT or LC at sight). Anything requiring 50%+ upfront, or full payment before shipping, is a high-risk signal especially with unfamiliar factories. For first orders, an LC at sight via a tier-one bank adds protection on both sides, with a slightly higher financing cost. Avoid open-account or net-60 terms until you've completed at least three clean shipments with the same factory.
Conclusion
Bangladesh in 2026 is not "the cheap country" anymore. It's the scale leader for cotton knitwear and denim, the LEED-certified sustainability leader on paper, and the duty-free gateway into Europe for brands with real volume. It's also a market where compliance discipline separates the winners from the rest, and where a wrong factory match costs more than the savings recovered.
The fit depends on product category, order volume, destination market, and how much compliance capacity you bring. For brands ordering 5,000+ units of cotton basics shipping into the EU, Bangladesh is genuinely hard to beat. For smaller programs, technical categories, or US-bound brands without scale, other origins usually serve better.
The LDC graduation clock matters too. Brands modeling sourcing plans past 2029 should price in partial EU duty exposure and consider whether Turkey, Morocco, or Portugal anchor a more durable nearshore mix.
Book a free 15-minute call and we'll tell you honestly what you need: sourcing, a tech pack, production consulting, or just the directory. No pitch, no upsell.
Book free 15-min call See sourcing packagesFind your factory: Browse the free global factory directory preview, or unlock the premium directory for $39 to see 200+ vetted factories with direct contacts, MOQs, and certifications.
References
- BGMEA Export Performance, 2025
- BGMEA Factory Directory, 2024
- BKMEA, 2025
- Bangladesh Bureau of Statistics, 2024
- WTO World Trade Statistical Review, 2024
- ILO Bangladesh Country Profile, 2024
- International Accord on Health and Safety in the Textile and Garment Industry, 2024
- RMG Sustainability Council (RSC), 2024
- European Commission, Generalised Scheme of Preferences and EBA, 2024
- USITC Harmonized Tariff Schedule, 2024
- USGBC Bangladesh LEED-Certified Factories, 2024
- McKinsey State of Fashion, 2025
- Better Cotton Initiative, 2024
- Reuters: Bangladesh Garment Wage Hike, 2023
- Textile Today, 2024
